Hello friends,
I try to open an .RGX file but I have this error and after the roboguide close. I can open file with another laptop with no problem.
I installed the ruboguide as administrator and I am administrator of my laptop
Please help,
Thank you
Hello friends,
I try to open an .RGX file but I have this error and after the roboguide close. I can open file with another laptop with no problem.
I installed the ruboguide as administrator and I am administrator of my laptop
Please help,
Thank you
Thank you very much !!
Thank you for your reply. I still have a small question: what is the name of this option or this roboguide version or this separate license I don't know what it is.
Hello,
I want to see the duty cycle after simulation, but I don’t see the option in roboguide. And In RUN Configuration I can’t enable duty information, do I need an option ?? You can see the picture
thank you for your help
Hi,
Thank for your reply, the program worked but when we changed the CPU of the controller and the emergency stop card, we have this error. I can’t CLEAR THE STATUS OF I/O because I don’t have the Karel program and I don’t know what’s in it.
We can’t passes from the pc file to Karel file ?
Best regards
Hi Team Fanuc
I have the error "I/O status is not cleared" and it's because of a Karel program. How can I reset this error knowing that I only have the PC files and I don't have the source files in KL
Thank you for help
Send me your mail adress, i will you send Ipendant control, and about share point designer you can find this in web
Thank you very much !!
Hello friends,
I would like to transfer the menu utility config from my roboguide cell to my real robot without having to use all of above transfer, do we have a file for this menu utility that I can transfer to the robot? Is this possible?
thanks in advance
firstly You must save your Hmi file as STM from SharepointDesigner.
Put your stm file on USB stick.
Load it into the robot controller (UD1) (if you have a picture for background or other .. Load this picture (JPEG) into the robot too)
NEXTLY
GO in your teach pendant, MENU => NEXT => SYSTEM => VARIABLE => $TX_SCREEN => choice number of screen and click on detail. $Destination : enter "/fr/FileName.STM (FileName is the stm file name who you have load in the robot controller)
$SCREEN_NAME : enter à title for your HMI.
AFTER, put MENU => NEXT => BROWSER => chose your SCREEN NAME and it should appear.
IF you want to display your HMI from program, you must CALL DSP_WEBP and enter the number of your HMI. for exemple if you have registred your HMI on 3rd place in SYSTEME VARIABLE, you must write CALL DSP_WEBP(3). and when you execute this line, Your hmi will be displayed.
I hope I've helped you, if not come back to me
Hello,
I am currently using share point designer 2007 and I am uploading a file to the teach during without any problems. What is stopping you?
Thank's for your reply, I know that's i need option and i can run karel program on roboguide but only when I select program and i do shift + forward from teach pendant, but when i run the program directly as a simulation he doesen't run, but i tried a method and it's ok ==> i created TP program and I called my karel program in this, i ran the tp program as a simulation and my program karel was also executed a simulation.
I don't know why we can't run the karel program directly as a simulation
Hi everybody,
Why can't I run a Karel program as a simulation on Roboguide? (I want to call the simulation program in my Karel program, is that possible? (This is to see the parts being picked up...)
Thank's in advance for help
You can select your user frame and click "edit frame", nextly you can see where is your frame, it's may be too far from your robot, you can check the picture shown below
Hello everyone,
I have a problem with the roboguide conveyor simulation, please check the screenshot and the video.
When I start the simulation I don't see the box on the conveyor, and when the robot drops the part I see the part but still without the box.
Thank you for your help
Thank you very much for help
Hello friends,
On roboguide, when you press on the blue buttons (shift, and the move buttons in manual) they remain maintained, I would like these blue buttons to be like the other buttons. is it possible?
thank you in advance
It works, thank you very much.
I have another question, what's the différence between the variable RMT_MASTER (menu ==> system ==> Variable ) and the config Remote/local setup (menu ==> system ==> config ) ??
Thanks for your reply
I have push buttons on PC ( it's an html HMI) I can control only DI,DO,RI,RO with push buttons but I can't control UOP signals
Hello friends, I'm a beginner on fanuc, I am student
I want to configure the UOP signal with the Digital Outputs signal to control my robot remotely
thanks for help