Posts by Nick_
-
-
-
are you in the quick of full menus? (Fonction-0-1)
-
Thanks! yes you can delete it on the FR: but the file is still on the MD:
-
I need to delete the file usrhmifl.stm in the MD directory, I not able to delete it cause the file is protected, any idea how to delete it?
yes i tried by FTP, same problem
-
I just add a new .stm and i'm wondering how can I add it to the menu/browser choice,
All the other pages appear as a choice in this menu....
thanks
-
those are outputs, not inputs
probably need to change input mapping for $MOVE_ENABLE to 1025Thanks!!!! everything is ok now
-
if it can help someone else :
You must add the .mod name to the program directory called segments.ndx and to the file System/Home/Alias/Program.map
-
-
hello,
I'm just trying to jog an old robot, I made all the jumper to bypass the safety but I'm still unable to move it cause i get the alarm :
configuration error i/o driver DN2DRV and Error on writing driver Dn2DRV .in the past this robot was control by devicenet , as I only need to jog it in manual how can i remove this alarm?
thanks
-
here's the problem, As I don't have the Painting pack license on my RobotStudio, I just copy and paste an existing Module, then I made some minor adjustment, the Module is located where it suppose to (System/Home/programs) , then I add the module name in the file System/Home/Alias/Program.map, as a new line
the problem is the module name do not appear on the flex pendant, But if I change the name of an existing one in the Program.map , it appear on the flexpendant program choice but it still call the old program.
So the question is , where should I add my module name if I want to use it? Cannot find where the module are call.
-
hello,
As i'm new to ABB, In Robotstudio usually i'm adding new programs in the Rapid / T_ROB1 file, but for an existing system I need to Add a new module in the Home/program... How can I add a module as I dont find the option....
thanks