Is there any advantage to switching off the controller instead of reboot from teach pendant? I guess reboot is more safety..
Posts by Dzonzi
-
-
Some video tutorials exist on Xpert but not sure what they are... I don't use SimPro...
What do you use?
-
OfficeLite. Because i get an error that no safety interface has been configured....
-
Hello,
I need to add either SIB standard or extended but when I click on it and place it into project structure > hardware > components it disappears immediately.
KSS 8.5.7, the controller is active. If I make it inactive, I can add SIB bad still it disappears after activation.
What am I doing wrong?
-
-
-
Hello,
where can I find ip address that I should paste in SimPro to connect OL? I guess it is not that one in KCP in the network config tab.
-
-
-
Thanks for this information. I'm gonna install 15.1 because 12.x is kinda obsolete.
-
Problem solved. My version of vmware was too new and I needed to downgrade.
-
Hi guys,
I have an issue pic rel
but on OffliceLite Ver. 8.5.6 not phisical smartpad.
What do you recommend?
-
How they figured out that 3 software will be better than one? I would like to know their reasoning.
-
Kuka is kinda piece of ****. Why do I need 3 different software to run one robot? And 2 of them are paid. ABB and Fanuc have only one environment for full control and it works great. Kuka makes simple things complicated.
-
If I have only one instance of OfficeLite and I want to run several robots from the line I deploy each robot project to OffliceLite and switching active project on HMI I just switch the robot? Or there is another way to simulate a few robots in one OfficeLite?
-
You are god damn right!
-
No. I mean mastering by EMD with teach offset.
-
-
Hi,
Let say we have a tool changer and 3 tools but they are pretty the same (same weight, shape, etc.). On KR C2 we had a file with mastering offset with extension .cal in C > krc > roboter > ir_spec and we could just copy and paste mastering. Is there something like this on KR C4/C5? Mastering each tool is time-consuming and I would prefer copy if tools are almost the same.
thanks in advance
-
And what if i get KSS 8.6.7 in the future and officelite will be 8.6.2? Would it work?