Hello!Everybody!
Have a stupid but important question : Where can i find an oficcial manual or document, in which i can find info about operating hours per day or week of ABB IRB1200.
If there is no this manual/ i have a question how long per day can IRB1200 work without stop. I need information )
Thanks , in advance.
Posts by mr_ruslan
-
-
-
yes, i have backup file
-
Hi everyone!
help me solve the problem, please.
i have a event message 12008-Missing attribute is missing in cfg file
don't remember when it has appeared.
i add a pic with the message on flexpendant
Which configuration file shall i re-edit.
I watched EIO, MMC, MOC,PROC, SIO, SYS. There is nothing to change on line 63 -
hi all!!
I tried to control signals from XS12-XS15 on IRC5 compact via TIAPortal.
how can i set the I\O in ROBOTstudio 6 in correct way?
I could set the systems signal from IRC5compact (exp. "Motors ON", i can watch the changes from,"0" to "1" in TIA portal)
help me please)) -
here is manual
-
thank you for attention and answer.
I have solved some problems, i could connect PLC and IRC5 compact. now i try to transfer DI/DO from IRB5compact(XS12-xs15).
Have you got manual to transfer signals in right way? -
i have one manual.
try to find something useful for you, but not sure. -
hi, EVERYBODY.
Is there step-by-step manual to connect PLC and IRC5comact using TIA Portal.?
i have tried many times. but there are some errors in TIA -
hi, everybody!!
i have IRC5compact and Irb1200
i want configurate Profinet,to connect to PLC S-7 Siemens
is anybody know the way to ippnio.xml file?
I read manual of "Profinet controller/device" but don't understand where is the "ippnio.xml" file. -
everything is ok.I meant: the marking of pins. i've found.
-
thank you
have you got the scheme of connection with pins ? -
i have the same quistion and want to ask: what can i do if data from Flash-card with Image boot was erased? IRB2400-robot
do you know? -
Hello everybody!!
I work with Kuka-robots.
Now i try to work with ABB.
there's on KUKA KRC4 a safety interface X11.I've connected devices (exp.: safety locks, light curtains, etc) direct to KRC4.Can i connect safety devices direct to IRC5Compact?
-
Hi, everyone.
Is anybody has Manual of IRB1200? -
no i don't.
so what can i do with this error? -
Thank you a lot.
-
hi everybody!
i have written earlier.
I have the ABB irb140 WITH DUAL CABINET iRC5.
I have turned on Robot since one year. Nobody worked with it.
I have got some messages and errors. The next message:Force sencor not setup. there is no external ForcecontrolSensor.
what shall i do with this error? -
Hi, everybody!!
I wrote earlier. I have the ABB irb140 WITH DUAL CABINET iRC5.
I have turned on Robot since one year. Nobody worked with it for one year exactly.
I have got some messages and errors.
the next message: Absolute accuracy not activated/event message 50316.
how can i sovle this problem. -
hello_world!!! hello everyone!!
I have the ABB irb140 WITH DUAL CABINET iRC5.
I have turned on Robot since one year.Nobody worked with it.
I have got some messagesand errors.
Error 20032 Revolution counter not updated. What schould i do? help me please.