Display Moreare you sure you are on a same subnet?
are you sure you have needed rights and services?here is the basics:
1. on a controller log in as Expert
2. while logged in, minimize HMI
3. open Computer and right-click on D:\ and check properties - if drive is shared, with who and what access rights are given. if needed adjust them. this window will give you EXACT info to type into your PC to connect to shared folder
4. bring back HMI and note down Network settings for Windows interface. default is 172.31.1.147, 255.255.0.0
5. on your laptop make sure network settings match those of KRC, for example set your network interface to 172.31.1.148, 255.255.0.0. ping KRC to verify connection
6. open windows explorer and click on Computer, that will show all drives and in menu make Map network drive visible
7. pick unused drive letter such as W: and as folder enter shared link from KRC (see step 3) or enter path using format "\\machine\folder_name", for example \\172.31.1.147\d (it is acceptable to use either machine name or IP address) BUT make sure here to place checkmark on "Connect using different credentials" or you may not see prompt to enter user name and password. depending on windows and KSS version, user name and password may differ. on KRC4 usualy user name is KukaUser and password is 68kuka1secpw59
Hey panic mode,
is it possible to put some characters (%d) in the path to obtain a folder containing the current date in its name, for example 220528 or 20220528, tomorrow 220529, and so on?