yes, I am aware of that, why do u always have to be so snide, novices come here for help and you chew them up and spit them out, a simple answer would do just fine thank you.
Posts by CTJohnB
-
-
I didn't mention I did connect monitor and keyboard, and nothing on monitor, I'm wondering did hard drive get corrupted and may have to partition and format to reload software?
-
Hello, I have an error with a red screen that says connection to KRC not Possible ! showing on my pendant, I have a KRC4 robot,
has anyone run into this.
Thanks john -
https://www.robot-forum.com/robotforum/man…or-kuka-robots/
hope this helps you out its seems tough getting answers here at times, I'm far from an expert, but I am willing to share what little I know to help you out. I know whats its like to struggle and hear nothing but goto kuka collage or read the how to post, personally I am self taught by reading manuals and trial and error, but Ill do what I can to help,if need be IM me your email and we can talk further
John -
Thank you all for the help, I appreciate it very much
-
Thank you, all of the above mentioned has been completed, we just decided to use the kuka, verses a standard pick and place due to geometry of parts, and our kuka guy quit. So I am determined to make this happen, So I can further myself in my career. so I just need a starting point on how to program multiple pics and drops without a mile of script in one program. So any and all help would be greatly appreciated.
Thank you
John -
Thank you for your reply, I am learning to program this robot by reading Kuka manuals and am attempting to self-teach myself, So any and all help Is very much appreciated. How would one go about creating such a program.
Thank You
John -
hello all, I am wondering about the PalletTech program, is this an additional purchase or can I create one ?
thanks all and have a great new year
john -
so I have copy and pasted the moves and commands to a subdirectory program, and the same pick ups and drops of parts still do not work ? how does a command become corrupted and not function.
thanks -
I need help with a program I am trying to create. First off, I am limited to programming only with the teach pendant, I have no access with lap top as of yet. Also I am self-teaching myself so I am not very well versed in the programming of the Kuka robot. I have created a program to pick up parts from one nest, and drop parts into a second nest, there are a total of 4 pickups and four drops of parts to the nests, with a loop command added for continuous run as a display for upper management as to how the robot works. So I have put all of the moves into one program, all of the pickups and drops were done exactly the same way, by using the out command from the logic tab. all of the opening and closing of the grippers work except for 3 of the 8 programmed. ? Is the reason the 3 are not working a result of a conflict with in my program that may require additional coding or does the Kuka not support such coding? resulting in me having to create those moves in separate folders, and then creating a main program with call commands to call the grippers separately.
Thank You
john -
42 Subprograms to merge into one ? please understand I am learning this on my own as I read the pdf manuals I have downloaded and printed . so please with me if I'm not up to par on all the lingo
Thank you for any and all help
John -
Good morning, I created a program that has 8 pics and drops in it. Of the 8 actions to open or close the grippers 3 do not work? All the code is the same for the commands. Should I have written 4 separate programs and just called them from one main program with the call command?
Thank You
John -
through teach pendant, I cannot connect with the laptop as of yet, and also I am teaching myself how to program robot because engineer that had done it quit, so I jumped at the chance to learn the kuka
-
you got me, it worked though ? i have no idea why. mayb because i was in teach mode ?
-
ok, i got it, I needed to put a space between brackets, now can you add more than one call command to a program ? I tried making a program that calls on other programs and can only get one to run, what am I doing wrong ?
thank you -
thank you, i did add brackets and in these forms, name (), (name) , Name{} , {name} , [name] , name []
and I keep receiving error Instruction inadmissible -
oh ok thank you, so what command would I use to call a program to add to another, with motoman I would type CALL: program name ?
-
it just goes past it and doesn't activate that command
when you say target label your talking about the name of the program I'm trying to call right? -
Good morning, I am trying to add a code to open an additional program following the completion of the initial commands of original program; I added the go to command as such
GOTO smpup
............
............
smpup:Is this the correct way to write this command, or do I need to create a new folder with those commands calling and looping both programs from one folder?
Thank you for any and all help
John -
I got it, Thank you everyone for your help