hallo
I would be very handy Sergey Tabanov information.
If you can Share everything you have on this topic
Can you explain to me what it is roboteam ,wokspace .
hallo
I would be very handy Sergey Tabanov information.
If you can Share everything you have on this topic
Can you explain to me what it is roboteam ,wokspace .
Hello
You can write something more, maybe you have some pdf.
combining robots had in mind for the network.
Is it possible to do this on a local network.
Hello
Can you tell me how these two robots are linked together.
I have two robots so arranged and may in the future I would like also to connect them.
I think more short circuit. just do not know where to look as if it happened later. I have something like this at the axis 5
so you're right 4 pins are used . I send photos disconnected plug on robot KRC1
Refresh topic
And so I bought a calibrator with a cable from KRC1 well and I was looking I have one robot from the controlling KRC1 and two of krc2 and here nasunoł was a problem was first contacts with KUKA offered to exchange slots in krc2 on the slot of the old type but it turned out that already do not sell these sockets, well, I started to look for and the end result (before buying shifted the seat of KRC1 on krc2 and running normally):
lemo ERA.2E.305.CLL
BRE.0K.200.NAS
LUMBERG 3114 04 (4 pin)
Can you tell me something more about this script, how the script works. how to run temporarily or manually? In what language you wrote skryp?
kr 150 (2000) floor krc2 kss 4.1.7 error number 1136
Hello
Recently when moving axes 5 and 6 showed me a message ACKN errors. a5 heatsink temperature. You can tell from what reason shows this error. the robot was running five minutes I do not see a chance to warm up.
I do not have KRC Configurator I want to send the archive the net but I can not because woldery as if they were prevented from moving and deleting files inside wolderów I can remove or move the problem is with folders (date, ir_spec, lib, mud, PowerOn, template) I made a script that moves the archive automatically KR2 now he wants to do it on KRC1
so I know there is no path KRCConfigurator
I do not see KRCConfigurator
in archiv central None (archive.zip) moves folders: date, ir_spec, lib, mud, PowerOn, template if you try to move these folders over the network gets access denied
Hello
How to move the archive path in KRC1?
Thank you for helping panic mode and helped me a lot for your understanding with my broken English
Hello
It otherwise I start to panic mode write what he wants to do, in the beginning I must say that I am green on elekryki I have to only buy things that will be needed and what we print have a connection of all this will take care of someone else. Well, yes there is a fence for fence two robots (control KRC 2) are 3 goals one double at the gate wants to set a limit switches on the corners with individual entrances wants information such tubes screwed at every entrance Off switch awaryny such .I would like to find out what else needs some extra switches relays what would you have offered to buy (I note with ever such installation is not seen) asked me the exact description of these protections, whether you open the door you need to confirm a switch closures door.
Hello
Trying to check a door limit switch, plugged it into X-11 7-8 (control Krc 2) after the entry pops operator safety / gate open after closing operator safety door / gate open disappears.
the robot is not new just bought the disc was not used by the robot
this robot kr150 2003
Hello
He needs to know what oil is suitable for the arm, and how much it have to pour
Hello
Yesterday took for checking the strips into balls after unscrewing the cover He started to spill oil have not met yet with that something.
my question is what to buy oil to be completed and how much of this oil is pour some sort of scoop?
I'm a little fuzzy sticker