Posts by amolghule7
-
-
-
Hello,
Can anyone is having experience to communicate Proface HMI(Ethernet Ip) directly to KRC4 Controller???
-
Dear Sir,
Please suggest the external HMI that can communicate with KUKA KRC4 controller.
Thanks
-
Dear Sir,
I required help on KUKA robots to connect external HMI ---->KRC4. Is it Possible? If yes then what are the methods.
Because in ABB And Fanuc Robots It is possible to connect external HMI directly to the controller.
Thank you.
-
-
I need to compare the position valus from two backups with a same robot from kuka
Can we compare the two different backups from kuka with same robot?
Is there is any software that compares the position value from two different backups with same robot in kuka? -
I am using the laser sensor that gives only the 0-10v Output
-
Sir,
I have connected the analog input module in Controller R-J3iB.I am using the laser sensor. i am getting the 0-10v supply on multimeter but on teachpendant it is showing some different values (40 to 11) and response of changing in that values is also very slow.Please help me out.Thanks in advance -
-
-