Posts by ashokpatel_2007
-
-
-
-
Please provide us that robot electrical Manuel.
-
I requested to you please provide us robot manual : Maintenance ,Electrical
-
Now i am installing ASEA robot with ESAB welding but that controller after switch on power communication erroe will be show on Teach Pendent.
Please help me on that matter. Please find attached robot and controller name plate.
-
Actually that controller and robot is very old one i can't show the cabinet name plat of robot. Robot and controller is ASEA.
-
Thanks for reply,
Actually i do that from key board press F1 that kcp is not any displaying last 10 minuts after i have swithing off controller than no any display on KCP.
Can please if i will change the motherboard than problen solved or not,becouse of some time display on and some time not screen on of the KCP
-
-
we are commissioning ASEA AB MIG welding ROBOT of old model. we need operation manual . So Requesting to those who is working on this system, please avail us with electrical connection diagram and suggest me clue for commissioning.
-
Hi,
We are commissioning ESAB AB MIG welding of old model. We do not have operation manual . Requesting to those who is working on this system, please send operation manual and electrical connection diagram or website.
-
Thanks for the reply,
Actually i will change the battery and connected the key board and from key board press F1 than window is full hanging, and some time after again switch on the controller not display on KCP. Please write how can rectify this issues.
Note: You kind information some time kuka KCP displaying and some time not.
-
-
-
Thanks For reply !
I am try the puss on enable switch but can't open .after booting screen please find attached photo. This alarm cannot reset.
-
thanks for reply,
from botting 7410 alarm coming but f5 reset than gone but as per your process do but not servo on
-
Hi Sir,
I am know MRC robot but this application now i am reinstating now ,So i Need your support for this
-
Thanks sir,
That problem be ok now but sir Enable And Servo motor on key not performing on the Teach Pendent. Please find attached photo
-
Thank you Sir !
Actually sir our teach pendent no any Alarm showing but from the TP Enable Or Servo on not working and not light glowing.
Please find attached the photo,please do something. Maybe that's ways not axis are moving on the with jog mode
-
can please write us where is the shock sensor circute bord location