Thank You !!! Replacing the cables to robot corrected the problem.
Posts by wrench-head
-
-
-
-
-
I did create a new system and now getting these errors. I was hoping that the backup from a couple of years ago would correct the issues.
-
After doing a C-start I have tried to download a system from backup using Robinsall . Everything looked good until it starts to copy files. I get an error message -2001: Failed to copy any file from the prgram directory. Program directory may be corrupt. Any ideas what i need to do to correct this.
-
Hello, we have an IRB6600 with a S4Cplus doing a simple pick and place of forgings.
1)Home at press
2)Take part
3)Go to conveyor
4)Release part
We would like to add a heat treat process to this line. Is it possible to after #2 take part read temperature if good continue to #3 if not change to different set of routines ? Go to bin/Release part/Return home
Thanks -
Hello RoboticsMan, Thanks for the link. I have contacted Scape Technologies, but am hoping to fine someone that has offices in the US.
-
Hello,
I work for a forging company that we are planning to integrate an ABB IRB6600 with a S4C+ to a production line. The plan is to pick billets from a bin and place them conveyor. I have been charged with the task of finding a vision system that is compatible. Any reclamations. Thanks -
Hello,
I work for a forging company that we are planning to integrate an ABB IRB6600 with a S4C+ to a production line. The plan is to pick billets from a bin and place them conveyor. I have been charged with the task of finding a vision system that is compatible. Any reclamations. Thanks -
Thank you, I created a basic OS that only has the DSQC509, and with the jumpers I am now able to test movement. I have sorted the connections for external safety relay and light curtain. I would like to interface a proximity switch input to start a routine and a second input to trigger a gripper output. The controller has a DSQC328A board. Can I use this to interface? I would like to accomplish this then have a vision system supplier quote integrating. Thanks again for any help or advice you can give.
-
Hello,
I need some help with a S4+ M2000 and IRB6600 that I am setting up to test. It came from an Auto Plant and we are looking to use as a material handling robot. The cables to the Safety bus and the DSQC504 CAN2 were cut. After powering up I get 71369, 71139 & 71058 errors. How do I correct these or is there a way to jump this out on the DSQC509. The DSQC328 has power, the MS & NS are lit green. The DSQC504 CAN1 NS & MS are lit green CAN2 NS is red & MS is green. The DSQC509 EN MS NS are lit green ES1 ES2 GS1 GS@ are not lit, the AS1 AS2 are lit yellow.
Thank You