Posts by tirumala reddy
-
-
so what is the difference between external i/os and universal i/os
-
hi am working on a new project . in that i made interface between motoweld and robot controller. after that i made a trail program . but arc is not generating . pls help me what i have to do
-
thanks rs
i want to take two robot backup at a time. like in abb.
is this possible to do in kuka. i am using kr c4
-
hi
i am working dual robots in a single cell. till now we took back up from controller .
but i want to take back up from teach pendant
-
hi
i am working on kuka dual Trunnion . it having same fixture on both side. i made programming on one side .is it possible to make mirror copy and it having synchronization . if its possible please tell me how.
-
what is the use of specific io s
is it possible to inter face plc signals and specific ios .
what type ios is possible to inter face with plc. please give the names
-
how master jobs can we create in dx 100
please can one send programe back up of motoman
-
-
Hello guys
Is this possible To increase or decrease current and voltage in abb
If it possible then tell me hOw
What Is vtoarc and other tthings in welding comments
-
hi to all
i am working with new handeling robot used for laser cutting
here laser head ic constant and robot is moving
so much varation is they & we are making modifing wiht using parallel shift job . but they is no use
i cheack parts befor and after modifaction in cmm they is only .1 mm change with in .7 mm (.6 mm is not get change or what happen ......... ) i am not getting
so what would be the reason
-
-
hi
I would. like. to change home. position
I make changes. in variable position. of robot it's getting. change but in my. plc hmi it not showing in home. position
place can any one help me
what is EIMOVE L
& I saw in my program I saw pstart sub 1any one explain. in detail. about pls
-
i am working with new motoman robot.how to configure the io of plc in teach peadent
what is the use of variables (like bool,integer,string .....)
pls explain in detail of each -
why revolution counter is coming every time in arc welding robot
difference between MOV L and MOVE C
-
me to dont know what is the use of external tcp
-
array means what guys
-
hi frinds
what is meant by set step counter.
use of step counterhow to write in program
,
, what the mean of coma i saw in my robot program -
that ok bro
let me explain one process i wold like to write a program on this case.
first i load the part in fixture. and i will close the door.robot have to come and it have to pick the part from fixture.when it reach the forming m/c my door should open.for that where i have to give the signals (pls explain in detail)
-
cmos means what and use