can i change a ncp board from a working robot to check it? Without problems?
Posts by menno
-
-
everuthing is checked.
One led (0) is on, the led (1) is off.
I have put a FC card from a other nx100 in to NCP01, but nothing change.
Also change teachpendent, nothing.
-
oke thanks, i will look at it.
-
how can i get software on de cf card?
There is a yaskawa disk in de controller
-
-
Hello,
I buy a second hand robot with NX100
When i turn on the mean switch, the teachpendent starts up but hangs in its startup screen.
What could be the cause?
Does anyone have an answer to this.
Menno
-
Hello,
I need help. Vision pc sent coordinates to the robot (in P030).
But I will store this data in the robot software, so I can store more coordinates from vision pc, example in a registor.
Then can a few parts (on a conveyor) to the robot.
Is this possible or not? How can i do this.Menno
-
Hallo, I have de same problems. The robot wil only moved by hand in joint coord. Also the robot don't moved with test-fwd of test-bwd. What can i do.
It's is a SK6 witch MRC controller. It's is weld robot with a plc. Is this a problem in the plc or in the robot? -
I think safety guard, this message comes when you turn on de servo power. Maybe the connections beween CN14 or CN15 on het safety guard.
-
Hello,
I have a problem too, Servo tracking error 1380 on the S axis.
It is a SK16 MRC. The robot was doing his job but stops on this error. All others servo give a click (release brake) but de servo on the S axis not. Is this the problem? How can i release the brake with hand?
Can someone help me? -
Hello,
Question, we have a new Motoman MPL160 robot with DX controller. I need a external start. I have a wire too B1 on cn308 with 24V but de robot wil not start on is special input. The key of the teachpendant stays on play or must the key on remote voor external start? And where is de special input for the external hold?
I'am sorry for mine englisch!!
Who can help me. Maybe i must call the Motoman company.Greats Menno
-
I have a motoman sk6 mrc. Can somebody help me with a list of inputs and outputs and wire connections on the green terminal blocks. De terminal block in connect with the CN1. This robot has two MIO04 card.
Who can help me?Menno
-
Thank you, it works.
-
I have a Motoman sk6
He gives a error when you push the start button.
Error 0140 Can't start using P Box
What can i do?