All right, that means you changed the IP in Windows on the KRC. So the SmartPad itself should be fine.
However, you're going to need to rebuild the robot from source, using a KSR stick.
SkyeFire
I have Prepared KSR Stick and I restored the complete software from KUKA hidden partition.
But the result is seems like as before.
When I take a look to the CSP LED panel in front of controller the LED Status like as (Picture 1 in Attached File)
According the KUKA document should I change the SSD Hard Drive? (Picture 2 in Attached File)
It’s amazing that I can create an image from SSD and also restore to SSD by KSR Stick, So how it possible? SSD Problem!!!
Do you have any experience regarding this issue!!!?
https://s6.uupload.ir/files/e781f22a-b8c6-4cec-948d-0f248010261c_8dwc.jpeg
https://s6.uupload.ir/files/4f717456-51f4-4d2e-b30b-94cc604c8873_u0fk.jpeg