We had the same problem with the TP of a brand new R-30iB Mate Plus controller. We got some advice from Fanuc tech support. In the end, Fanuc have sent us a new TP to fix it.
Hey! Did you also witness all the LEDs lit up on your main board?
We had the same problem with the TP of a brand new R-30iB Mate Plus controller. We got some advice from Fanuc tech support. In the end, Fanuc have sent us a new TP to fix it.
Hey! Did you also witness all the LEDs lit up on your main board?
Can you boot into the boot monitor?
To do this, hold F1 and F5 while cycling power and continue to hold it. You should be able to see it within 30 seconds of power up.
Hey We tried this and it shows a white screen with some Japanese text.
This is what Teach Pendant shows when F1 button is pressed.
Hello!
We have a FANUC robot controller R30iB Mate Plus. We were trying to install the PAC code and there was an accidental power cycle after which teach pendant only displays black screen. We are not able to go past that screen. However, on pressing F1 we see a screen with some text in Japanese language. After power-on, we opened the controller and saw all LEDs on the main board are lit. I wanted some help in diagnosing the issue and what steps should we take to resolve this issue.
Thanks