Is it possible to secure the controller so that the operator can move the robot manually but cannot make changes to the program or positions/offsets? For fanuc controllers maybe give an input set buy PLC of the machine this is easier to programm for me.
Write/touch-up protection
-
Wouter -
April 4, 2024 at 4:05 PM -
Thread is Unresolved
-
-
Lemster68
April 4, 2024 at 4:14 PM Approved the thread. -
Password Protection is a paid option sold by Fanuc, you should be able to configure who can do what on the pendant with this option package.
-
The password function is described in the basic operation manual (e.g. B-83284EN/10). Also check these threads for some more details:
PostXML file for password levels
I want to make a password level that is identical to operator level except that they can also edit Registers. How difficult is that? What do I need to know about xml to make that happen? Any resources and answers are helpful.EPeters1December 6, 2021 at 4:00 PM PostPassword Config Export
So, I just installed J541 Password Protection onto a production R30iB, and need to configure it. Since I haven't played with this before, I built a virtual clone in RoboGuide and started setting up passwords.
So far, I've been able to set up basic Install, Programmer, and Setup users. But for the more granular control, making custom user levels, I apparently need to edit an XML file and import it. If I understand the manual correctly, I should be able to Export the XML file for the users I…SkyeFireSeptember 6, 2023 at 7:55 PM -
Password Protection is a paid option sold by Fanuc, you should be able to configure who can do what on the pendant with this option package.
i wil check if we have this option thx
-
The password function is described in the basic operation manual (e.g. B-83284EN/10). Also check these threads for some more details:
PostXML file for password levels
I want to make a password level that is identical to operator level except that they can also edit Registers. How difficult is that? What do I need to know about xml to make that happen? Any resources and answers are helpful.EPeters1December 6, 2021 at 4:00 PM PostPassword Config Export
So, I just installed J541 Password Protection onto a production R30iB, and need to configure it. Since I haven't played with this before, I built a virtual clone in RoboGuide and started setting up passwords.
So far, I've been able to set up basic Install, Programmer, and Setup users. But for the more granular control, making custom user levels, I apparently need to edit an XML file and import it. If I understand the manual correctly, I should be able to Export the XML file for the users I…SkyeFireSeptember 6, 2023 at 7:55 PM I'm going to check for the file if there is one there already or if i need to make one thx