I am testing with a robot that is placed on an inclined floorplate, which I would like to show in Roboguide. Pretty easy, I can change the robot's location in the cell via the group's controller properties. Now every time I take a new backup of the robot and load it in Roboguide I need to update the location to be at an angle (and shifted upwards a little). Is there some system variable or other data-location on the robot where its position within a cell is defined?
Ideally when I take an AOA backup of the physical robot, it should load an inclined robot in Roboguide. So this information should be stored/configured somewhere on the physical robot too right?