Hi.
Is possible connect to DENSO controller in KRC2sr?
I have problem with DENSO main board. I changed it for new one but no working. I thing that memory is empty. I want copy data from working board and paste it in new one. ( Or I can use main board from DENSO RC7 controller but this don´t work too in KRC2sr )
I try:
Connecting RJ45 to DENSO board in KRC2sr and use Wincaps3 - can´t find controller. (I used default IP adress and Telnet IP adress)
Connecting DENSO pendant to DENSO board in KRC2sr - showed me nothing
Put the RC7 DENSO board in KRC2sr - KUKA failed in 10%, DENSO have red error LED and red LED on board 1,2,3,4,6.
Connecting DENSO pendant to RC7 DENSO board in KRC2sr - Start on normally bud have herror - 27A6, 21BA.
I have two KRC2sr controllers with wrong DENSO main boards and I want repair it.
Thank you for any answere.