Hello everyone,
I am having issues with a Reis robot.
It is a welding robot RV16 and the controller is SRV16.
This is the error we get on the programming device's display:
We cannot press any of the keys on the programming device. We checked if there is communication between the programming device and the controller. When we press the enabling switch, we can see the safety relays change state.
Here is also the image of the status LEDs on the platine:
Here is also a couple of videos of the PHG display and the status on servo drives. Maybe it helps.
https://wetransfer.com/downloads/d84f…11072734/97f7d3
Does someone know what this sys fail error is about or have some documentation about it ?