Hello,
I bought my first robot. I have a problem with the safety gate. I have a JZRCR XCO01B driver.
How to start the robot without a safety gate? Which pins should be connected in the controller to make the robot work?
Very thanks!
Hello,
I bought my first robot. I have a problem with the safety gate. I have a JZRCR XCO01B driver.
How to start the robot without a safety gate? Which pins should be connected in the controller to make the robot work?
Very thanks!
The safety gate is only active in play mode. You should be able to turn the servo power on in teach and move the robot.
To run the robot in play mode, the gate inputs must be closed. You need to look at the wiring diagrams for your robot. Can't tell from the picture if it's single or dual channel.