Hi guys,
Anyone knew how to convert Palletizing program (such as unit load parameter) from PalletPRO to be .TP program? So we can load and use it in actual Robot.
Thanks
Hi guys,
Anyone knew how to convert Palletizing program (such as unit load parameter) from PalletPRO to be .TP program? So we can load and use it in actual Robot.
Thanks
Hello, with PalletPRO you have the capability to download the virtual robot's data to a real world robot if you have a Ethernet or serial connection to that real world robot. Also you can upload from real world robot into PalletPRO.
But PMULxxx.VR should be your unit load data file, so loading this file will set the robot up with the configured unit load.
Hello, with PalletPRO you have the capability to download the virtual robot's data to a real world robot if you have a Ethernet or serial connection to that real world robot. Also you can upload from real world robot into PalletPRO.
But PMULxxx.VR should be your unit load data file, so loading this file will set the robot up with the configured unit load.
hello, thanks for your ideas. I'll try.