I want to do Ethernet Ip Communication with Allen Bradley Plc and Staubli Tx90 Robot.. But I couldn't find the staubli eds file.Not in any document. Could you help ?
Staubli Robot Tx90
-
toprako -
July 26, 2020 at 8:25 PM -
Thread is marked as Resolved.
-
-
Hello toprako,
in order to use the Ethernet IP fieldbus protocol on CS8C, the optional card PCU/ETHIO is needed. The software applicomIO is required to configure this card. After installing the software, you can find the files here:
C:\ProgramData\BradCommunications\applicomIO\4.2\Equipment Library\ETHERNET_IP_EDS\applicomIO Adapter
I added them in the zip folder.
EDS files for applicomIO PCI/PCU-ETHIO board with the protocol EtherNet/IP Local Slave (Adapter)
applicomIO Adapter Version 2.1: 0243000C00020201.eds
applicomIO Adapter Version 2.2: 0243000C00020202.eds
applicomIO Adapter Version 2.3: 0243000C00020203.eds
applicomIO Adapter Version 2.4:0243000C00020204.eds
-
Hello Psyril, Thank you very much