Hello ,
Can u help me with Fanuc Profinet instalation ?
We had a robot in our workshop and we order a molex dual channel board for it.
We are missing a few steps , we have the profinet manual. We inserted the card into its socket in the controller R-30BiPlus .
When using the PFN-CT tool we can see the card at 0.0.0.0 and the blink command works , but when we try to change the IP addresss we get a fail message.
On the Robot TP we dont see the profinet setup page so we cant access it (its supposed be at I/O > Profinet).
How do we get this page? Should we enable something or install something?