Hello,
I currently have a problem with our kawasaki robot when making an backup from the controller
over network/service port.
when making the backup the controller goes by everythring like real data, programm data...
but when it gets to the string data the controller shuts down. (corrupted data in the string data?)
this is the second kawasaki i had this problem with.
These controllers are connected to a plc of our machine which transfers data to the robot,
i know that our plc programmer made changes to the plc before i had this problem.
I have a backup from the day before i got this problem, is it possible to upload this backup?
And can i read out this corrupted string data?
i dont have a lot of experience with kawasaki.
Thanks for reading
Martijn Ouwersloot
Copal Handling systems