Hi all,
My NXC100 controller can't boot successfully, stay with a page fault screen. The CPU board(NCP30) has been tested in good function (include the CF card, memory). The battery was being damaged, and I have replaced a new one for it . It maybe not the reason of the PAGE FAULT error, I think. Now , I suspect the two rest boards , one is JANCD-NIF30 (I/O board contain the CMOS data with a battery power supply) ,the other is SGDR-AXC01 (axis control board) .
Had anyone dealed with the same problem ever before? Or, your any advice would be very appreciated ! (BYW, which model NO. is the techpendant . The X81 of the controller is only installed a connector head.)
Jacky 2018.10.15
HELP: nxc100 controller PageFault occurs when booting
-
jackywu163 -
October 16, 2018 at 4:03 AM -
Thread is marked as Resolved.
-
-
addtional, neither the pendant nor host computer could communicate with the NXC100 controller with the
pagefault error.