I know I did this a while back but cant remember. can someone tell me the variable that changes the boot up screen on the teach pendant. I am using the panel wizard option and did a custom screen and need to call it on power up before the program is running.
Thanks!
changing teachpendant power up screen
-
Iprogram -
October 6, 2018 at 1:55 PM -
Thread is marked as Resolved.
-
-
anyone have anything?
-
Hi,
I've done this with our HMI via custom HTML/STM Files. For example purposes, lets say the screen you want to load at robot startup is "main.stm"First, under variables, on the $UI_CUSTOM[1] card, change $START_SPID to 31 and $START_SCID to 250.
Next, on the $CUSTOMMENU[10] card, assign a title (any text works) and the program name of the HMI page as 'main.stm'
Then cycle power.
-
And $ui_config.$recovermenu = 2
-
Hi,
I've done this with our HMI via custom HTML/STM Files. For example purposes, lets say the screen you want to load at robot startup is "main.stm"First, under variables, on the $UI_CUSTOM[1] card, change $START_SPID to 31 and $START_SCID to 250.
Next, on the $CUSTOMMENU[10] card, assign a title (any text works) and the program name of the HMI page as 'main.stm'
Then cycle power.
That was what I was looking for Thank you!!
-
And $ui_config.$recovermenu = 2Curious...What does this change do?
Sent from my iPhone using Tapatalk
-
Anyone had any success booting to a browser screen on startup using a Tablet TP? I can get the above method working on standard TP but not on the tablet.