Hi Everybody,
One of our customers struggling with a connection between a Fanuc Robot and Fanuc CNC machine.
I have installed a IO link Connection unit on the CNC side for the CNC to Robot connection. I have tested the CNC side and it is operating correctly.
The Robot integrator is saying when they plug in the JD1A-B cable to the robot it autoassigns Rack 0-Slot 1. Is this correct for this type of connection?
I told them they have to match my IO points. Meaning I have set 16 input bytes and 16 output bytes. I just don't see what they could be doing wrong? Could anybody advise what screen on the robot for them to check. I do not have a robot here to scroll through the screens myself.
Thanks in advance!