My .img back -up on a 2016 R30iB controller was corrupt. The power was turned off when it came back up the robot would not run. Waiting for startup. I did an image backup. When trying to load this image, it partially loads. I used a previous image file from a previous date, it works fine. My problem is from the last backup until the corrupt one, there were changes in the teach programs. Can I recover the TP program from corrupt image back up? Don't really want to program if there is a different away around it.
Fanuc help with corrupt image back up?
-
AutomationGuru -
March 10, 2018 at 3:17 AM -
Thread is marked as Resolved.
-
-
Check the number of files in the image back-up....
I don't know what the scenario is but, I have had a missing file.
for example on a 64meg system I would only have file 00-62.
I would copy 62 and rename it 63.....
I have had success doing this.....
I have not ever gotten an explanation as to the cause of this......