I’m trying to assign an IP address to my gripper but the festo application software can’t seem find the controller. So when I plug the cpx USB adapter into my laptop and in the service port of the valve island nothing happens
Festo valve IP address
-
franco06 -
October 31, 2017 at 12:35 PM -
Thread is marked as Resolved.
-
-
[/img]I guess ur connected with festo mnt. tool. u have option to scan and if everything is connected well u have to see that festo
-
Is this a Profinet? If yes you can use any profinet configuration tool for assign IP and Profinet Device Name. (e.g. Siemens Step 7, TIA Portal or PCWorx from Phoenix Contact) There is no need Festo tools. Please note Device name is important for profinet if this name don't assign, controller can't communicate with device.