Hi Everyone, Iam searching for R30Ib EDS file to connect it to my CompactLogix but in vein. Can anyone please provide me one. Thank You.
Fanuc Robot R30Ib EDS File
-
sugun -
June 23, 2017 at 1:51 PM -
Thread is marked as Resolved.
-
-
Do a backup to USB, the last option on the second page, "Com. Conf.", will save the EDS to your device.
-
I would recommend using a Generic Module option in the PLC software and setting Input/Output/Config sizes and assemblies from the Fanuc's Ethernet/IP manual (they depend on the amount of signals that you want to exchange and Ethernet/IP configuratiuon as far as I remember) - in that case, you don't need an .EDS at all.