Hello all,
I have an interest in sending my master count or positions to a Proface HMI thru our PLC (Omron) and logging it in our HMI until it is updated frequently thru the robot controller. I have seen some threads on here on sending a position using position registers using a program to run in the background. This would be a great help for us if I can master this down due to master counts not being logged by users here at my work.
Thanks
A.
Sending mastering data to HMI
-
agar700 -
January 16, 2017 at 1:29 PM -
Thread is marked as Resolved.
-
-
SNPX for getting directly to the HMI is the way to go..