I am trying to identify what cable i need and where i can pick one up cheap.
I identified that it was the robot cable causing the error after swapping it for the external axis cable, instead of loosing the robot position i lost the external axis position proving that it is the robot cable causing the error.
The cable dose not have the full serial number at the tab has been damaged, the robot is a 4600 series running with an IRC5 controller.
The cable is marked on one end with "XP2" on the plug and "XS2 Robot Resolver" on the cable.
The other ens is marked with "R1 SMB" on the plug and "XS2 Robot Resolver" on the cable.
The label attached to the cable whitch is half missing reads:
Art. No: 3HAC 24
Rev. No: 01
Ser. No: 14085#10
Man. Week: 1230
Can any one give me the full part No for the cable witch will help me start the search for a new one.
Alternatively I have been advised that one could be made.