Found servo 062 alarm pl tell how to re-set
Servo062 alarm
-
Ratnesh -
August 24, 2016 at 2:33 PM -
Thread is marked as Resolved.
-
-
Found servo 062 alarm pl tell how to re-set
Robot Fanuc R 30iASHIFT Reset
#Xperia | C4 ....
-
According to the manual SRVO-062 is caused by a depleted battery or disconnected battery
Do not turn off the controller,because without battery backup calibration can be lost
Check and replace battery and reset the error
probably need to reset it inside the masterization menuGood luck
-
When changing the battery off the robot 's power
#Xperia | C4 ....
-
When changing robot batteries the power MUST BE ON!!!!
-
When changing robot batteries the power MUST BE ON!!!!
I already wrote it#Xperia | C4 ....
-
When changing the battery off the robot 's power
I already wrote itgokturk_1:
Looks like you're saying "Turn OFF the robot's power"...