Hi , there are some problems with my Panasonic robot AW005cl after the relocation Recently ,
I have a panarobo AW-005cl. When i turn on servo. Robot display error : " A6110 encoder batt Err0001".
Please help me! Thanks
Panasonic Aw 005CL "A6110 encoder batt Err0001"
-
linhdong -
March 3, 2016 at 4:26 AM -
Thread is marked as Resolved.
-
-
My manual for our Panasonic AW 005C lists:
A6110 Encoder Battery Error: Voltage drop of the encoder battery. Replace the battery.
Check the battery pack located at the base of the robot.
-
I have replaced the battery. you can guide me how to reset
-
There is an old discussion about the PG connectors for the servos and resetting the encoder. Namely, the 2nd and last entry explains where the PG connectors are and how to short them to reset the encoders.
-
I do not find that article , you can send links to help you not , thank you so much
-
-
thank for all.
help me how to connect PG Robos 005cl , I do not know because there are treatment of the line -
-
My manual for our Panasonic AW 005C lists:
A6110 Encoder Battery Error: Voltage drop of the encoder battery. Replace the battery.
Check the battery pack located at the base of the robot.
Hi Mesrobo, do you still have access to any AW005-CL manuals? If you would be able to scan/email them to me Id be happy to pay for your time, it would be very helpful as I have just acquired one of these machines and am trying to recommission it. I hope you can help, thanks, Nathan