Hi!
Have bought an old Motoman with a cabinet MRC SP100, everything seems fine with the machine but when starting up servo I got the the 3590 error.
Have tested almost everything and coming up with that it´s must be the 2YASKAWA JANCD-MRY01B-3" that are the problem!The problem is that I cant
find any manuals or tech.spec, schema for this card, for B-1 it´s a lot of but not the B-3 card.
Any one now something about the card and the settings for the SW1 and 2 the standard settings and also the CN2 standard settings. Noting to find on Motoman sites or product pages. Attaches some photos of the card.
Would be nice with some help. Yes everything are ok with main security board and, contactors. But only one circuit are ok and green. Have tested the other contactor and ok.
Best regards!
Fredde