Hi, its that possible?
Rw6.01 to rw 5.61?
Thanks so much
Enviado desde mi LG-H955 mediante Tapatalk
Hi, its that possible?
Rw6.01 to rw 5.61?
Thanks so much
Enviado desde mi LG-H955 mediante Tapatalk
Yes it's possible.
But you must be create image CF card.
Yes it's possible.But you must be create image CF card.
Its complicated?
I have some troubles, someone kills system in robot ( in that moment someone puts an ip in flex pendant and flex pendant dont conect anymore to controller), the only we have is the exported key so we upgrade robotware and install a clean system, but flexpendant dont connect to the controller...
Enviado desde mi LG-H955 mediante Tapatalk
No, You need CF card reader for USB and any software for image creating (e.g. Ghost from Symantec or Acronis TruImage)
I don't know exactly how to change pendant ip adress but if pendant not connecting to controller, probably controller pc was not boot up or hardware malfunction. If you have old backup you can get original key and you can make down or upgrade existing robotware. Try Flexpendant to connect another controller and if pendant working correctly please check to main computer (Controller pc)
No, You need CF card reader for USB and any software for image creating (e.g. Ghost from Symantec or Acronis TruImage)
I don't know exactly how to change pendant ip adress but if pendant not connecting to controller, probably controller pc was not boot up or hardware malfunction. If you have old backup you can get original key and you can make down or upgrade existing robotware. Try Flexpendant to connect another controller and if pendant working correctly please check to main computer (Controller pc)
So, its no way to restore flexpendant setti gs without it connecting to the controller?
Enviado desde mi LG-H955 mediante Tapatalk