I have two machines. Both had been sitting, disconnected from power for 2 years before I purchased them. Both units had lost the software and required the boot disks.
I installed a borrowed set of boot disks into the first robot (has elmo and siemens motors) and the unit works fine.
I tried using the same set of disks on the second machine (all motors are siemens) and it gives me a wrong disk error on installation of the elmo/siemens disk 2 and aborts the install.
Any ideas? Can someone send me another cooy of boot disks?
Thanks in advance
Matt
Sent from my iPhone using Tapatalk