Good afternoon all,
I have a Cognex 7050 Camera talking to a Fanuc Rj3 robot over serial.
About once an hour, it's like it looses comms to the robot and then the robot faults out for uninitialized Data (line 29) Which is Status(1::0)
I can immediately hit Abort and restart and it will take back off.
I checked the wiring and the temp on the camera. The wiring looked fine, but the temp was 117. 113 was the max operating temp.
Has anyone ever dealt with a overheating Cognex camera, and if so, did it act like this or stop working all together?