Hello everyone. I have tried to find a demo KUKA OfficeLite online but no success. I would be glad if anyone could help me out with a link or how to download it. Thanks.
Help: A demo version of KUKA Office Lite needed
-
bestbet -
June 5, 2015 at 12:34 PM -
Thread is marked as Resolved.
-
-
I haven't seen a demo version of Office Light since KSS 4.2 or 4.6. As far as I know, there has never been one for KSS 8.x.
-
Thank you for your reply. I use ABB software till now therefore I am used with ABB Robotstudio and RAPID for offline programming and simulation. Now I would like to practise with KUKA robot offline programming. I have not used any KUKA software before, and that was why I searched online for a demo/free version of KUKA software to start with. Please do you have any suggestion or better idea on how to go about it? Thank you very much!
-
The best way would be get some KUKA training. But KUKA software like KUKA Sim and Office Lite are very expensive. But if you have a KUKA robot in your facility then you can install Work Visual software and also it should be with the disc of manuals which may help you to learn KUKA programming. Other way is to install Orange Edit on your computer which is an editor and gives almost the same KUKA environment to start with.
Good Luck
-
Thank you for your reply! That means there is no ANY free trial/demo software from KUKA. We had many robots in my former workplace, but all ABB. I just want to get myself familiar with KUKA programming and simulation environment in case I will have to work with one very soon. I will surely install Orange Edit and start with that.