We've got an ancient ERC K10S. We are missing some of calibration arrows on the body of the arm. Any thoughts on how I can get a calibration done anyway?
ERC Calibration without arrows
-
galvanist -
November 13, 2014 at 9:06 PM -
Thread is marked as Resolved.
-
-
Hi , see past forum page 10 - post K6SB , April 12 2014.
Attachment shows Arms - origin/ home positions .
Without arrows , just do your best. -
Thanks. I'll do that.
-
So I ran into an issue. If I use the position in that file, the range of motion is much more restricted than it has been in the past. If I use a position like the image here: https://sudoroom.org/mediawiki/imag…me_position.png, things seem "normal" to me. What am I doing wrong/misunderstanding?
-
Hi , the only thing I can think of is you might have newer software version , if so , change "L" axis to make it vertical . This is now a days the more conventional origin posture .
EXCUSE me for not reading your last post correctly ,
The posture you posted "IS " the one shown for you in the attachment from page 10's information.