Hello, please
I've updated my rev.counter by calibration mark and run MoveAbsJ [[0,0,0,0,0,0],[9E+09,9E+09,9E+09,9E+09,9E+09,9E+09]]\NoEOffs,v200,fine,tool0;
Why 5 axis move a littel bit ?
Here is MOC.CFG and some pic:
Hello, please
I've updated my rev.counter by calibration mark and run MoveAbsJ [[0,0,0,0,0,0],[9E+09,9E+09,9E+09,9E+09,9E+09,9E+09]]\NoEOffs,v200,fine,tool0;
Why 5 axis move a littel bit ?
Here is MOC.CFG and some pic:
Have you ever change 5th axis or all wrist of your robot??
After make rev. counter update, moving a little bit is quite normal but the small calibration line must be inside of the bigger calibration line
Hello
Never change any axis or motor. Manipulator never open.
What it can be ?