Trying to start an RJ-3 from a PLC signal using UOP and RSR1
Think I have all necessary UOP input on when trying to start. IMSTP-HOLD- SFSPD-ENABLE and RSR1
Not sure if RSR1 should be held high or not but for now it is constantly on.
Upon pushing the start button the PLC gives three signals in order for a half second each ABORT---RESET---START.
Can see the signals on the TP but no start.
UOPS Enabled... Have program created named RSR0001 with only one instruction that calls my main program.
Any help appreciated.