Hi
I have IRB140 with S4C+ controller and i want to define new system . i make the boot disk with RobInstall and the cold start the controller and put the disk1 in the floppy drive when i press the key boot disk the error wrong disk-1 appear . where is the problem ?
thanks
wrong disk1
-
ELECOMP -
June 8, 2014 at 10:26 AM -
Thread is marked as Resolved.
-
-
Hi, What do you mean by cold start???
-
Check your floppy drive and Floppy Disk. Make Sure system image file is also there in disk. Try These
1. Change Floppy to usb kit instead of floppy drive.
or
2. Create a system in rob install with proper key and click the option "create boot disk" then insert the floppy and copy the files.I hope this will help for you, Because we faced the same problem. And two days back we solved it.
-
Hi sandeep.lerio
I sure floppy drive and floppy disk as well but i don,t sure the system image file .
I use the backinfo files in backup folder for RobInstall .
can you send me a correct key ?
thanks