Hello all,
I would like to connect a hmi to my s4c controller thru rs232.
Any suggestions on what brand and type of hmi is compatible?
How to control the data to read and write?
Thanks for the help.
Hello all,
I would like to connect a hmi to my s4c controller thru rs232.
Any suggestions on what brand and type of hmi is compatible?
How to control the data to read and write?
Thanks for the help.
Kroket,
This is a topic I am interested in. I have done this indirectly using a SLC 500 with an RIO card and a DSQC 350 (using the PLC as a network adapter basically). The parts were used but still a fairly high cost. As far as the HMI goes almost all HMI can use rs232. I don't know enough about the sio on the robot and was not ready to attempt it...but if someone out there can point us in the right direction I have some HMI's and a robot and am willing to do some testing. Cheers.