Hello everybody.
I can't seem to find a signal diagram for CycleON signal ANYWHERE. Can anybody either give me a very detailed description of it's operation or provide me with a signal diagram? THANK YOU in advance.
Hello everybody.
I can't seem to find a signal diagram for CycleON signal ANYWHERE. Can anybody either give me a very detailed description of it's operation or provide me with a signal diagram? THANK YOU in advance.
there is no any specific diagram for cycleon or system signals in ABB because you can define a system signal on your I/O board. I mean if you want to make your second output cycleon signal, just define it.
#
SYSSIG_OUT:
-Status "CycleOn" -Signal "do_CYCLE_ON"
#
EIO_USER_SIGNAL = EIO_SIGNAL:
-Name "do_CYCLE_ON" -Type "DO" -Unit "myboard" -Phsig 2\
Then your second output of your I/O board is cycleOn
I know how to assign cycleon to outputs. I need a signal diagram of how the CycleON signal functions
Thanks.. Haven't been able to find anything yet.
Sorry for not explaining myself properly... I am in the process of converting ABB IRC5 programs from an old project to a new similar project using KUKA robots and I am trying to find a suitable replacement signal for CycleON (boss wants minimal PLC program changes). Thanks.
Check the manual "Technical reference manual - system parameters" (3HAC17076-1) chapter 4.10.4.4 for a description of CycleOn. You'll find the manual if you google it.