I have solution for this case. Let's to place it here, may be it will be useful for other people...
See attached docx file.
I have solution for this case. Let's to place it here, may be it will be useful for other people...
See attached docx file.
At the same time I correct Work Visual project and at diagnostics I see this:
At Send socket diagnosis and Receive socket diagnosis I see IP address that is unknown for me! Here, I think, must to see IP of my master device, the robot at this case. Now I search how to change this value...
Here is my wiring... I think that it's OK...
Zero answers... I am very disappointed. Apparently there are no people here who work with Ethrnet/IP... Or I don't explain well?
Hi
For the first time I try to connect via Ethernet/IP KUKA Agilus with Beckhoff BK9105, KL1408, KL2408.
All is OK, BK9105 is connected, not red lights, no blinking lights, no messages for error, but...
At KL modules I have no signals!
I set output signal manually, via program too, but result is the same.
Do you have some ideas where I make mistake?
I attach full Work Visual project.
Best regads
Ivan