Posts by happytech
-
-
-
-
-
-
-
thanks again kwakisaki I really like your 'remote power' suggestion makes a lot of sense I and will check it this week when I am back at the plant, and let you know how I go.
I really appreciate your advice, it is great to know there is network of experienced and smart people working in this field and willing to share knowledge!
I can see no jumpers on 1KP X7,8,9 from the pic I took
cheers
Peter -
thanks very much kwakisaki I will step through your suggestions on Friday
we have 3 ZX / 42 that were spot welding robots at a local Mitsubishi plant and re-purposing them for garnet blasting and also aluminium coating applications. so we have one for spares hopefully as needed. -
We are installing D42 and ZX200S
Unable to fully startup controller, no lights on panel or any LEDs showing.
So far have checked / set the following:
1. Set the transformer to X501B as the input is 500V
2. 200V is available on plug to AVR
3. Fuses appear OK on 1KP
4. No lights or sign of life beyond AVR plug - unsure what to check next
Any suggestions for next step greatly appreciated.
cheers
Peter