Hi SharplesR, ranjanbatra,
Thank you for your help.
I have S4C system.
Attached may help in the future
Hi SharplesR, ranjanbatra,
Thank you for your help.
I have S4C system.
Attached may help in the future
Dear All,
How do I register additional I/O on the system
In the control cabinet there are 2 additional I/O units (DSQC 328) but I cannot see the I/O on the teach pendant
Does anyone have any experience of setting up these I/O units
Thank you
Hi Joey2point0
I have connected PC to RG2 using RGUTIL software. (Quiet a while ago, But willing to dig up the info if you still need)
I used old DOS box (6.2 if I remember well)
Also I have some spare boards for this controller
Hi Lemster68,
Cold start (By Computer Board Removal) and fresh installation of RW3.0
This time use Query option during installation.
Choose not to install spotware option.
Restart the system - Transfer MOC file.
System can now operating normally. No 40168 errors on boot up.
Thank you for your help
Yes- Just create as new module from teach pendant
I don't need the spotware.
I used disks (qty8) to install RW3.0
Do you think its something to do with Spotware option?
These are the alarms I get on restart.
Hi Lemster68,
just simple 3 line program
Hi Lemster68,
8 Program modules
I attach picture
Hi Lemster68,
Is there a possibility of background program running?
Dear All,
I just reinstalled RW3.0 to IRB6400M97 system. I tried to run simple 3 line program
MoveJ*,V1000,fine,tool0;
MoveJ*,V1000,fine,tool0;
MoveJ*,V1000,fine,tool0;
Each time I receive Error 40168 TASK Main - Reference to unknown Procedure TriggL
Does anybody have any idea how to resolve
Thank you
Hello All,
ARO Spot welding heads with Bosch Weld controllers available
Please contact if you require
Hello,
Have you had success in fixing your problem.
I attach picture of M97 controller with jumpers inserted to enable
Hi All,
I have ABB IRB6400 S4C M97 robots and controllers available.
2.4 - 150Kg
IRB 6400 Robot
S4C M97 Software
150Kg Payload
Quick Release EOAT
Hi Skooter,
Thank you.
Are Robot CPU DSQC322 and DSQC363 inter changeable assuming I am only using 1 external axis.
Dear Friends,
Can anyone tell me the difference between IRB 6400 M97 and IRB 6400 M97A?
Thank you
Hi Massula,
Thank you kindly
Hi Massula / All,
Would anyone have an instruction manual for RS3.1 or RS4.0?
Thank you
Hi Massula,
Thank you for your help.
Do you / anyone have any examples of pick and place program created in robot studio.
Cheers