Correct, but the maximum available module size is 128 bytes.
in fact i use 2 module, 128 IO on slot 1 + 128 IO on slot 2, like robot configuration, but for some reason
Tia give me an error and i would like to know why.
Correct, but the maximum available module size is 128 bytes.
in fact i use 2 module, 128 IO on slot 1 + 128 IO on slot 2, like robot configuration, but for some reason
Tia give me an error and i would like to know why.
I'm not sure if there are 256 bytes Input and Output modules available to configure. Check with TIA Portal if this input and output size is available. You can also open the GSDML file and check it.
Hi,
On GSD file i have found this:
In this way i have the same configurazione both on robot and plc, for testing poupose i haven't correct the position of IO on plc side
Good morning,
I was updating the bit exchange from the PLC to the robot, changing it from 1024 to 2048, but when I tried to compile with Tia portal I got the following error:
https://1drv.ms/i/s!AmhsXQKX13NgghfYHBulTU4EAna4?e=BQtQdQ
GSD File V2.33
Has this ever happened to anyone? How can I solve this?
Thank you