Posts by aljazkrizan

aljazkrizan · Files manally added aljazkrizan October 27, 2021 at 9:25 AM

thank you

aljazkrizan · Files manally added aljazkrizan October 26, 2021 at 5:02 PM

Hello

I have copied some program files (SRC. and DAT.) with inport function from previous project. And it show text in blue and it say "files manually added". On previous project its black (saved on controler side)

How can i save it so it will be same as previous project. Is it safe to leave it like that (for backups etc.)?

I'm using work visual 6.0.12, krc4, kss8.6

Thank you

A.K.

aljazkrizan · Transfare program from KRC2 to KRC4 aljazkrizan December 15, 2020 at 8:49 AM

Thank you all for help

i did it.

There was little changes in program so it was not that big deal

aljazkrizan · Transfare program from KRC2 to KRC4 aljazkrizan December 1, 2020 at 7:43 AM

Hello! Thank you

I'll do it. Got more than month to do it. If i create project in Workvisual and check program it shuld warn me about errors?

I have found some PDF fine Compatibility from 5.x to 8.x. i will post it here.

Than you again.

have a nice day

Kompatibilitaet_8x_en.pdf

aljazkrizan · Transfare program from KRC2 to KRC4 aljazkrizan November 30, 2020 at 12:29 PM

Hi all

I got a project where we have to change robot and cabinet. We will replace from KRC2 to KRC4. So before i accept project i want to know if old program from KRC2 works in KRC4 8.6.6. or i need to write it all over again? Or what do i need to change. I am new to kuka programing so i dont have a lot experience in this stuff

Thank You

Aljaž K.

Advertising from our partners