Hello
I need some manuals with hyundai hi5 robot. Can you help with this?
Hello
I need some manuals with hyundai hi5 robot. Can you help with this?
hello i'm fatih
I want to communicate with hyundai robot and mech-mind and perform teaching scrolling of a program (.job). My first goal is to do this by changing the TCP coordinates. If not, do it using the SHIFT command. My problem is that these operations are performed through the RS-232c serial port communication port. My system can communicate via the ETHERNET port. How can I solve this problem?
CONTROL UNIT:HI5-N30
ROBOT MODEL: HA010LW-00
Hello there
I want to create a kawasaki s52 controller sandbox. I need help with this, how can I do it? And is there a guide to it?
I'll be happy if you can help me. good day
selam
zx130s s52 denetleyici robotumun adımları ile giriş alışverişindeki beklemeler arasındaki geçişleri hızlandırabilir miyiz? yardımcı olabilirseniz sevinirim
iyi günler
hey kwakisaki
We know it isn't. but i need cad data of my robot to run robodk.
robodk can't provide that to me. I want to get support from kawasaki.
HI,
I NEED CAD DATA TO ADD MY KAWASAKI Z130S ROBOT TO THE ROBODK PROGRAM. I WOULD LOVE TO HELP.
Unfortunately, we could not get support from KAWASAKI distributor.
thanks kwakisaki
The information you gave will be useful to me. I tried croset but it is a difficult application. robodk can give us results in a simpler way.
Selamlar
Örnek bir program görüntüsü gönderdim. burada adım hızı değil. Aynı hızda 2 adım arasındaki geçişte robotta yavaşlama oluyor. bunu nasıl önleyebilirim
Selamlar kwakisaki
t52 denetleyicim var. robodk programı ile lazer kesim yapmak istiyorum. Adımlar arası geçişlerde robotum standart olarak yavaşlıyor. yani, adım durağına yaklaştığında ve adım başlar yavaştır. ortaya çıkan kesme bölgesi daha fazla bölgenin erimesine neden olur. bundan dolayı bir sorunum var
hello there
I want to use my robot as a laser cutter. But the problem occurs because my transitions between steps are slow . Can we adjust the transition speed between the steps
Nachi MZ04 robot TCFD denetleyicisi için kullanım kılavuzuna ve AS program kılavuzuna ihtiyacım var. yardımcı olabilirseniz sevinirim.
İyi günler
Hello kwakisaki,
Can I ask you one more question. I have a connection problem with robodk. I cannot send the program directly from the pc. I wonder if you have done such an application before. if you can help
thanks
I found this and applied it. and as a result it looks like I did what I wanted. I don't have a welding unit at the moment, but I think the robot's movements will help me.
Hello there
I am creating a 2d or 3d program as a kawasaki with the robodk program. But unfortunately I failed to upload the program to my robot via robodk. I can copy the program to step steo and throw it over ktrem. But unfortunately I couldn't send it directly via robodk. I would be glad if you could help.
have a nice day
hello kwakisaki,
I want to do spot welding with the as program. I downloaded the servo gun manual. But unfortunately I couldn't create the working cycle. Can you help with this. If there is a sample project, it could work much more.
thanks
merhaba kwakisaki,
As programı ile punta kaynağı yapmak istiyorum. Servo tabanca kılavuzunu indirdim. Ama maalesef çalışma döngüsünü oluşturamadım. Bu konuda yardımcı olabilir misiniz. Örnek bir proje varsa çok daha fazla işe yarayabilir.
Teşekkürler
hello I want to create ops lasers communication with kawasaki robot. Does anyone have a KASload application? and can I help the friend who has practiced it before
Hi
Kawasakı c series has a control connection problem. Although I did not configure IP, there was an error connection error.
Would appreciate if you help.
thanks
sizin verdıgınız bılgıler dogrultusunda paylasımımı guncelledım
tesekkurler